Removing a broken screw is quite a difficult job to do. Indeed, the screwdriver is no longer enough to remove a screw with a broken or damaged head. You must use specific materials such as a screw extractor and follow several specific steps. How to remove a broken screw?
What do you need to remove a broken screw?
Before we start, let’s look at the materials we need to extract a broken screw :
A screw extractor ,
- A pair of pliers;
- A hammer ;
- A drill ;
- Screwdrivers of different sizes;
- A lubricant;
- A rotary cutter;
- Rubber bands;
- A pair of scissors ;
- Forests.
How to remove a broken head screw?
Got a screw broken and stuck inside? Do not worry. Removing a broken screw can be very simple by following these steps.
Get a screw extractor:
The screw extractor, or stud extractor , is an essential tool for removing the screw from its housing when it is broken. You can easily buy a screw extractor.
To be sure to remove any size screw, get a screw extraction set. You would be able to remove any type of broken screw: wood screws, lag bolts, plasterboard screws, metal screws, sheet metal screws, self-drilling screws, etc.
Drill a hole in the screw:
With a bit smaller than the screw, put a hole in the middle of it. Try to maintain a slow, gentle motion so you don’t risk breaking the bit inside the screw. If you are unable to drill the hole , start by replacing the drill bit with a 1.5 mm diameter drill bit.
Put the extractor in the hole:
Once the hole is drilled, place the end of your extractor in it. To make it fit well, don’t hesitate to hit it with a hammer . You need to make sure that the puller gets a stable place in the hole.
Turn the extractor counter-clockwise:
Put a screwdriver or a drill on top of the extractor and turn the whole counterclockwise. Thus, the thread of the extractor will stick to the screw and you can remove it without problem. If this does not work, strike the extractor again with a hammer or put some lubricant on the screw.
How to remove a broken screw without an extractor?
First you need to know that it is impossible to remove a screw with a broken head without a stud extractor . In fact, only screws with a damaged head can be removed without an extractor. To remove a screw with a damaged head without an extractor, try these different methods:
Test several screwdrivers:
The easiest method is to test several screwdrivers to see which one still turns the screw . Although this trick does not always guarantee convincing results, you can test it to see if a screwdriver can fix a broken screw.
Put on chemical:
To loosen a broken screw , you can also try pouring in chemicals like lubricants, Coca-Cola, or lemon juice. So you can dissolve the screw or at least the parts that cling to its environment.
Use a rotary cutter
You can also use a rotary cutter to create a new slot on the screw. Then remove it with a screwdriver or a knife.
What is Arcbazar:
Arcbazar is a business model that connects space owners and designers through architectural competitions . Space Owners benefit, because they get multiple design solutions at an affordable cost. Designers benefit, because they win cash, improve their portfolios, and step into the professional world through real and exciting design challenges.
How Arcbazr Works:
A renovation job, an addition to the home, modeling of retail space, design of an entire family home, a landscape project, a mixed-use development, or any other architectural design project. The Space planning owner describes the project, uploads images, and provides basic dimensions.
At ArcBazar, designers can sign-up to participate in these enlisted design challenges. Clients set the award money, the project timeline, and rank eventually all design submissions. ArcBazar then distributes the award money among the first three ranked winners.
